Control Module, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
The following are integrated in the All-Wheel Drive Control Module -J492- -1- :
- All-Wheel Drive Clutch Actuator -V622-
- All-Wheel Drive Clutch Position Sensor -G969-
Replacing
- If the All-Wheel Drive Control Module -J492- should be replaced, the >>clutch adaptation values<< for the old control module must be read out now using the Vehicle Diagnostic Tester. Refer to ADDITIONAL WORK FOR VEHICLES WITH "quattro ultra" .