Additional Work When Replacing All-Wheel Drive Clutch
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- These procedures are only done when the all-wheel drive clutch is being replaced.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Connect the vehicle Diagnostic Tester and switch on the ignition.
- On the Vehicle Diagnostic Tester, select the function Replace control module under Guided Functions in the directory AWD electronics .
- Start the selected program and follow the instructions in the display of the Vehicle Diagnostic Tester.
- Follow all the instructions give by the Vehicle Diagnostic Tester exactly.