Special Tools

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Crankshaft/Power Steering Seal: T20143

Fig 1: Crankshaft / Power Steering Seal Puller
Courtesy of AUDI OF AMERICA, LLC
Pressure Stand: T40099

Fig 2: Identifying Pressure Stand T40099
Courtesy of AUDI OF AMERICA, LLC
Dual Clutch Lifting Device: T40123A and Dual Clutch Lifting Device - Sleeve : T40123A/2

Courtesy of AUDI OF AMERICA, LLC
Puller - Clutch Module: T40176

Fig 3: Clutch Module Extractor T40176
Courtesy of AUDI OF AMERICA, LLC
Guide Pins - Gearbox: T40288

Courtesy of AUDI OF AMERICA, LLC
Thrust Piece: T40300

Courtesy of AUDI OF AMERICA, LLC
Assembly Sleeve: T40308

Courtesy of AUDI OF AMERICA, LLC
Thrust Piece: T50038

Courtesy of AUDI OF AMERICA, LLC
Shop Crane: VAS6100

Fig 4: Identifying Shop Crane VAS 6100
Courtesy of AUDI OF AMERICA, LLC
Engine Support Bridge - Additional Hooks (2 pc.): 10-222A/2

Fig 5: Engine Support Bridge Hooks 10-222 A /2
Courtesy of AUDI OF AMERICA, LLC