Input Shaft Seal, Replacing, Clutch Cover: Installing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Place the : T40308 on the drive axle.
-- Drive in the new seal with the : T50038 in the clutch housing until it stops.
-- Remove the : T40308 .
-- Install the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .