LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> SQ5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Controls, Housing (7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DK, 0DN, 0DP, 0HL)) >> 34 Controls, Housing >> Transmission Housing And Clutch Housing >> Overview - Transmission Cover

Overview - Transmission Cover

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Transmission Cover
GWWA34-11695Courtesy of AUDI OF AMERICA, LLC
  1. Circlip
  2. Pinion Roller Sleeve
    • Bearing "I"
    • Removing. Refer to Figure.
    • Installing. Refer to Figure.
  3. Transmission Cover
  4. Seal
  5. Cap
    • Replace after removing
    • Removing. Refer to Figure.
    • Installing. Refer to Figure.
  6. Fluid Catch Tray
    • Replace after removing
  7. Input Shaft Ball Bearing
    • Bearing "E"
    • Installation position: the surrounding groove points to the transmission cover.
    • Removing. Refer to Figure.
    • Installing. Refer to Figure.
  8. Circlip
    • Installation position. Refer to Figure
  9. Roller Sleeve for the Output Shaft
    • Bearing "F"

      FWD Vehicles

    • Replace after removing
    • Removing. Refer to Figure.
    • Installing. Refer to Figure.

      AWD Vehicles

    • Removing. Refer to Figure.
    • Installing. Refer to Figure.
  10. Circlip
    • Different versions
    • Refer to the Parts Information for the allocation.
scientia non olet · About LEMON Manuals