Clutch Housing, Servicing: Notes

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Grease Cap: VW637/2
Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A
Bearing Installer - Wheel Bearing: 3144
Seal Installer - Gearbox: 3295
Puller - Crankshaft/Power Steering Seal: T20143
Counterhold Tool: T10114
Bearing Installer - Wheel Bearing/Ball Bearing: 3074
Bearing/Bushing Installer - Multiple Use: VW295
Press Piece - Output Shaft Gear/Final Drive Gear: 3002
Subframe Bushing Tool Kit: 3301
Press Piece - Trailing Arm: 2010
Inductive Heater: VAS6414
Puller (Kukko 18/2): VAS251419
Internal Puller: VAS251615
Counter Support: VAS251623
Circlip Pliers: VAS211009