Special Tools
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Used Oil Collection and Extraction Unit: SMN372500
- Locking Pin: T10492
- Ruler (2 pc.): T40100
- Retaining Strap: T40155
- Oil Sump Assembly Pin: T40199
- Gearbox Support: T40206 and Gearbox Support - Drilling Template: T40206/3
- Gearbox Assembly Tool: T40213/1/2/3
- Assembly Tool: T40305
- Support: T40321
- Cover: T40322/1-4
- Hook and Support Tool: T40406
- Transmission Holder: T40407 Three-Phase Current Drive -VX54-
- Engine and Gearbox Bracket: VAS6095A
- Shop Crane: VAS6100
- Engine Bung Set: VAS6122
- Electronic Torque Wrench 3-60Nm: VAS6583
- Puller - Grease Cap: VW637/2
- Slide Hammer Set: VW771
- Engine/Gearbox Support Shackle (2 pc.): 10-222A/12
- Lifting Tackle: 3033
- Hook And Support Tool: 3311 with Hook And Support Tool - Bolt: 3311/1
- Lifting Eyebolt: 3368
- Not illustrated:
- Press Tool: T40323
- Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A