Selector Lever Handle, Removing and Installing: Installing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Check the clips -arrows- on the bottom of the selector lever handle upper section -1- are seated correctly, and if neces- sary press them in farther
- Attach the selector lever handle upper section to the selector lever handle lower section.
- Clip in the selector lever boot on the Selector Lever Trans- mission Range Display -Y5-.
- Check the selector mechanism. Refer to Shift Mechanism, Checking .