Selector Mechanism in the Vehicle Interior

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Shift Mechanism
- With the following integrated components:
  - Selector Lever -E313-
  - Selector Lever Position Sensor -G727-
  - Transverse Selector Lever Lock Sensor -G868-
  - Selector Lever Sensor System Control Module - J587-
  - Shift Lock Solenoid -N110-
  - Transverse Selector Lever Lock Motor -V577-
- The components cannot be replaced sepa- rately if faulty.
- Removing and Installing. Refer to Shift Mechanism, Removing and Installing .
Selector Lever Transmission Range Display -Y5-
- Removing and Installing. Refer to the appropriate Service Information.
Selector Lever Handle Upper Section
- Removing and Installing. Refer to Selector Lever Handle, Removing and Installing .
Bolt
- 3.2 N.m
- Not available separately
Selector Lever Handle, Lower Section
- With the following integrated components:
  - Selector Lever Release Button -E681-
  - Parking Lock Button -E816-
    - The components cannot be replaced separately if faulty.
    - Remove and Installing. Refer to Selector Lever Handle, Removing and Installing .
Selector Lever Boot
- Removing and Installing. Refer to Selector Lever Boot on Selector Lever Handle, Disconnecting and Assembling .
Bolt
- 8 N.m