Gearshift Mechanism on Transmission
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Drive Position Sensor -G676-
- Removing and Installing. Refer to Parking Lock Solenoid N486/Drive Position Sensor G676, Removing and Installing .
- Shaft
- For the parking lock
- Bolt
- 3 N.m +90°
- Replace after removing
- M6 x 30
- Parking Lock Solenoid -N486-
- Electro-Hydraulic part
- Removing and Installing. Refer to Parking Lock Solenoid N486/Drive Position Sensor G676, Removing and Installing .
- Seal
- Replace after removing
- Seal
- For the parking lock shaft.
- Replacing. Refer to Parking Lock Shaft Seal, Replacing .
- Spring Pin
- Lever
- For the parking lock
- Removing and Installing. Refer to Parking Lock Shaft Seal, Replacing .
- Cover
- For the parking lock
- With electric wiring harness
- Bolt
- 3 N.m +45°
- Replace after removing
- Bolt
- 8 N.m +60°
- Replace after removing
- M8 x 22
- Alignment Pin
- Quantity: 2
- Bolt
- 8 N.m +180°
- Replace after removing
- M6 x 55
- Bolt
- 3 N.m +90°
- Replace after removing
- M6 x 35