ATF Cooler - Tightening Specification and Sequence

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View of ATF Cooler, ATF Line

Courtesy of AUDI OF AMERICA, LLC

Tighten the bolts in steps according to the specified sequence:

ATF Cooler - Tightening Specification and Sequence

Step	Bolts	Tightening Specification / Additional Turn
1.	-1-	Install all the way by hand
2.	-1-	3 N.m +90°
3.	-2 and 3-	Install all the way by hand
4.	-2 and 3-	3 N.m +60°