LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> SQ5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Crankshaft, Cylinder Block (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4 BZ)) (DMSA)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Sealing Flange, Removing And Installing, Transmission Side >> Removing

Sealing Flange, Removing And Installing, Transmission Side: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .

-- Remove the bolts -1 through 8-.

Fig 1: Crankshaft Sealing Flange (Eight Bolts) Tightening Sequence
GWWA13-10509Courtesy of AUDI

-- Remove the sealing flange.

-- Cover the open engine components with a clean cloth.