Overview - Charge Air System, 2.9L Engine, Body Side
- Bolt
- 8 Nm
- Bracket
- Grommet
- Spacer Sleeve
- Bolt
- 8 Nm
- Bolt
- 8 Nm
- Bolt
- 8 Nm
- Clip
- Bracket
- Bracket
For the charge air cooler
- Bolt
- 21 Nm
- Electrical Compressor Bypass Door Valve -N731-
- Grommets
- Air Duct Hose
- Air Duct Hose
- Air Duct Hose
- O-Ring
- Replace after removing.
- Charge Air Pressure Sensor -G31-
- Removing and Installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- Charge Air Cooler
- Removing and Installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING, 2.9L ENGINE .
- Vacuum Hose
- Bolt
- 9 Nm
- Replace after removing.
- Bolt
- 8 Nm