Upper Air Duct Pipe, Removing And Installing, 2.9L Engine: Installing
Install in reverse order of removal and note the following:
- Check the O-rings for damage. Refer to OVERVIEW - CHARGE AIR SYSTEM .
- Replace seals, and O-ring after removing.
- Secure all hose connections with hose clamps that match the ones used in series production.
- Used coolant cannot be used again.
-- Install the oil filter element. Refer to ENGINE OIL FILTER, REPLACING
-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Install the charge air cooling circuit cooler. Refer to CHARGE AIR COOLING CIRCUIT COOLER, REMOVING AND INSTALLING .
-- Connect the coolant hose to the connector coupling. Refer to Fig 1.
-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .