Component Location Overview - Passenger Occupant Detection System
- Wiring Harness
- Seat position sensor/passenger occupant detection sensor/seat belt switch
- Available only with -item ) Seat Position Sensor
- Clip into the seat frame
- Black connector, connector station in the vehicle floor under the seat
- Removing and Installing. Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING .
- Wiring Harness
- For the seat heating element with passenger occupant detection system
- Available only with -item ) Front Passenger Seat Heating Element with Passenger Occupant Detection System Control Module -ZX14-
- Clip into the seat frame
- Connector station in the vehicle floor under the seat.
- Removing and Installing. Refer to PASSENGER OCCUPANT DETECTION SYSTEM, REMOVING AND INSTALLING .
- Passenger Occupant Detection System Control Module -J706-
- Removing and Installing. Refer to PASSENGER OCCUPANT DETECTION SYSTEM, REMOVING AND INSTALLING .
- Bolt
- Equipped on some models
- Allocation. Refer to the Parts Information.
- 1.5 Nm
- Control Module Bracket
- Equipped on some models
- Allocation. Refer to the Parts Information.
- Clip into the seat frame
- Front Passenger Seat Heating Element with Passenger Occupant Detection System Control Module -ZX14-
- with
- Front Passenger Seat Heating Element -Z8-
- Passenger Seat Occupant Detection Sensor -G128-
- Allocation. Refer to the Parts Information.
- Only available together with the cushion and -item ) Wiring Harness
- The passenger occupant detection system is bonded to the cushion
- Removing and Installing. Refer to PASSENGER OCCUPANT DETECTION SYSTEM, REMOVING AND INSTALLING .
- with
- Nut
- 1.5 Nm
- Seat Position Sensor
- Driver Seat Position Sensor -G553-
- Front Passenger Seat Position Sensor -G554-
- Available only with -item ) Wiring Harness
- Shown on the front passenger side
- Removing and Installing. Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING .
- Checking. Refer to Vehicle Diagnostic Tester.
- Bolt
- Tightening specification -item ) Bolt