Front Belt End Fitting, Removing And Installing: Removing
-- Move the front seat all the way forward and up.
-- Remove the B-pillar lower trim panel. Refer to B-PILLAR LOWER TRIM PANEL, REMOVING AND INSTALLING .
Belt end fitting without seat belt tensioner:
-- Push the carpet in the threaded connection area to the side and remove the bolt -1-.
-- Remove the bolt with the belt anchor -2-.
Belt end fitting with seat belt tensioner:
-- Push the carpet in the belt end fitting area to the side.
-- Remove the bolt -1- and then remove the belt relay -2-.
-- Disengage the belt end fitting -3- from the bracket.
-- Open the cover -2- for the belt end fitting -1- with a flat-head screwdriver on the catch -arrow-, open and push to the side.
-- Push together the catches on the clamp with a plies -A arrows-.
-- At the same time push the anchoring pins -2- together with the clamp -3- to release in the direction of -arrow B-.
-- Disengage the anchoring pins from the clamp in the belt end fitting -1-.