Overview - Passenger Occupant Detection Sensor

Courtesy of AUDI OF AMERICA, LLC

1. Passenger Seat Occupant Detection Sensor -G128-
   • Removing and Installing. Refer to Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING .
   • Clip in the seat frame until it clicks into place
2. Passenger Side Rear Seat Occupant Detection Sensor -G178-
   • Removing and Installing. Refer to SEAT OCCUPANT DETECTION SENSORS -G177-, -G178- AND -G1010-, REMOVING AND INSTALLING .
   • Clip in the seat frame until it clicks into place
3. Rear Center Seat Occupant Detection Sensor -G1010-
   • Removing and Installing. Refer to SEAT OCCUPANT DETECTION SENSORS -G177-, -G178- AND -G1010-, REMOVING AND INSTALLING .
   • The passenger occupant detection sensor is bonded to the cushion
4. Driver Side Rear Seat Occupant Detection Sensor -G177-
   • Removing and Installing. Refer to SEAT OCCUPANT DETECTION SENSORS -G177-, -G178- AND -G1010-, REMOVING AND INSTALLING .
   • Clip in the seat frame until it clicks into place