Charge Air System, Checking For Leaks
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Turbo System Tester Kit:VAG1687
- Adapters:VAG1687/3 , :VAG1687/11 and :VAG1687/15
Procedure
-- Pay attention to the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Connect the :VAG1687/3 and :VAG1687/15 on the right upper air duct pipe.
-- Connect the :VAG1687/11 with the :VAG1687/15 to the turbocharger.
-- Connect the hose -arrow- from the :VAG1687 to the adapter.
All additional procedures are described. Refer to CHARGE AIR SYSTEM, CHECKING FOR LEAKS .
Assembling
- Secure all hose connections with hose clamps that match the ones used in series production.
-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
Tightening Specifications
- Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS .