Rear Outer Seat Belt Guide, Removing And Installing, Sedan: Removing

WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

-- Equipped on some models: remove the fixed backrest. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .

-- Press the seat belt guide trim -1- out of the retainers -2 and 3- using the : 3409 and remove the trim.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the D-pillar trim panel. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING, SEDAN .

-- Remove the C-pillar trim panel. Refer to C-PILLAR-TRIM PANEL, REMOVING AND INSTALLING, SEDAN .

-- Push the rear shelf noise insulation in the area of the seat belt guide to the side.

-- Remove the belt from the seat belt guide.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow-.

-- Disengage the seat belt guide -1- from the mount and remove.

-- Equipped on some models on the right side of the vehicle: disconnect the connector for the parking aid warning buzzer.