LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S6 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (Seat Upholstery, Covers (Covers & Cushions)) >> 74 Seat Upholstery, Covers >> Rear Seat Covers And Cushions >> Cover And Cushion, Removing And Installing >> Cover And Cushion, Removing And Installing, Folding Backrest >> Installing

Cover And Cushion, Removing And Installing, Folding Backrest: Installing

WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Flip the protective strip -1- over 180° toward the inside in direction of -arrow A-.

GWWA74-10451Courtesy of AUDI OF AMERICA, LLC

-- Engage the protective strip in the groove on the backrest frame in direction of -arrow B-.

scientia non olet · About LEMON Manuals