Center Cushion, Removing And Installing, Upper: Removing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
-- 2+1 divided seat: remove the headrest guide from the center backrest. Refer to HEADREST GUIDE, REMOVING AND INSTALLING, CENTER FOLDING BACKREST, 2+1 DIVIDED SEATS .
-- Remove the trim -1- using the :80-200 in direction of -arrow-.
-- Unclip the center cushion upward from the pass-through in direction of -arrows- using the :3409 .
-- Insert the : 80-200 between the cushion and trim panel in the location shown.
-- Unclip the center cushion -1- upward from the front of the pass-through in direction of -arrows- using the : 80-200 .