Driver And Front Passenger Seat Heating Element -Z6- / -Z8-, Removing And Installing: Procedure

WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.

Cover and cushion separated. Refer to SEAT PAN COVER AND CUSHION, SEPARATING .

-- Clip the wires directly at the heating elements.

Standard Seat:

Courtesy of AUDI OF AMERICA, LLC

-- Align the new heating elements -arrow- on the cushion.

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

TIP:

The version in leather is shown.

Sport Seat:

Courtesy of AUDI OF AMERICA, LLC

-- Align the new heating elements -arrow- on the cushion.

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Comfort Seat:

Courtesy of AUDI OF AMERICA, LLC

-- Align the new heating elements -arrow- on the cushion.

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Continuation:

Further installation is the reverse order of removal.