Backrest Cover And Cushion, Separating: Removing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cover with the cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
-- Pull the cover -1- as far off of the cushion -2- as possible and cut the upholstery clips -3- using pliers.
-- Cut the remaining upholstery clips and remove the cover from the cushion.