Bleeding brake hydraulic system-vehicles with Electronic Differential Lock (EDL)
Step 1 - Intake line for EDL
- Bleeder screw on ABS hydraulic unit
Step 2 - Right rear caliper
Step 3 - Left rear caliper
NOTE:
Press the brake pressure regulator lever firmly toward rear axle when bleeding the rear brakes.
Step 4 - Right front caliper
-- Bleed caliper as for conventional brake system.
WARNING:
Also connect Bosch Abs Tester:VAG1710 and bleed the caliper with the ABS return flow pump running BOSCH ANTILOCK BRAKE SYSTEM TESTER VAG 1710, CONNECTING .
Step 5 - Left front caliper
NOTE:
Check brake fluid level and top off if necessary.