Removal And Installation: Driveshaft: Installing

-- Install driveshaft in wheel hub and loosely fasten onto flange.

-- Connect transverse link to wheel bearing housing.

-- Press wheel bearing housing downward, install lower mounting bolt for suspension strut, and fasten loosely.

-- Install wheel bolts in wheel hub and hold wheel hub with tire iron to prevent turning.

-- Tighten driveshaft-to-flange bolts.

-- Install cover for fuel tank and/or heat shield.

-- Install brake disc and brake caliper.

-- Press ABS wheel speed sensor into wheel bearing housing to stop.

-- Install wheel.

-- Install new wheel hub/driveshaft mounting bolt and tighten to specified torque with vehicle resting on wheels.

-- Tighten bolts between strut and wheel bearing housing.