Seat Belt Height Adjuster, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the seat belt height adjuster slider to the lowest position.
-- Remove the B-pillar upper trim panel (refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING ) and move it to the side with the seat belt.
-- Remove the bolt -4-.
-- Remove the seat belt relay -1- with the seat belt.
-- Remove the screw -3-.
-- Remove the seat belt height adjuster -2- upward from the B-pillar.