Center Rear Three Point Seat Belt In Folding Backrest, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear belt end fitting in the center. Refer to REAR SEAT BELT LATCH, REMOVING AND INSTALLING .
-- Remove the right folding backrest. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
-- Remove the backrest cover and cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING .
-- Remove the nut -1-.
-- Disengage the three-point seat belt -2- and remove it.
-- Guide out the belt -3-.