LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 378 (Passenger Protection, Airbags, Seat Belts (Child Seat Anchors - Special Tools)) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Overview - Rear Seat Belt Latch

Overview - Rear Seat Belt Latch

WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
GWWA69-11465Courtesy of AUDI OF AMERICA, LLC
  1. Nut
    • 40 Nm
    • Replace the bolt if it was removed because of an accident when the seat belt was buckled.
  2. Right Seat Belt Latch
    • with
      • Passenger Side Second Row Seat Belt Switch -F392-
      • Passenger Side Rear Seat Belt Latch Lamp -L370- equipment version
    • Removing and Installing. Refer to REAR SEAT BELT LATCH, REMOVING AND INSTALLING .
    • Always replace if the belt tensioner has deployed when the belt is buckled
    • Align with the direction of travel when installing, it must engage in the anti-twist mechanism
  3. Nut
    • 40 Nm
    • Replace the bolt if it was removed because of an accident when the seat belt was buckled.
  4. Center Seat Belt Latch
    • With Center Second Row Seat Belt Switch -F391-
    • For equipment version 2+1 divided seats
    • Removing and Installing. Refer to REAR SEAT BELT LATCH, REMOVING AND INSTALLING .
    • Always replace if the belt tensioner has deployed when the belt is buckled
    • Align with the direction of travel when installing, it must engage in the anti-twist mechanism
  5. Left Seat Belt Latch
    • with
      • Driver Side Second Row Seat Belt Switch -F390-
      • Rear Driver Side Seat Belt Latch Lamp -L369- equipment version
    • Removing and Installing. Refer to REAR SEAT BELT LATCH, REMOVING AND INSTALLING .
    • Always replace if the belt tensioner has deployed when the belt is buckled
    • Align with the direction of travel when installing, it must engage in the anti-twist mechanism