Passenger Occupant Detection System, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
- The passenger occupant detection system is only installed in the passenger seat.
- The service kit for the passenger occupant detection system must always be installed completely.
- This means that the components that belong together from the passenger occupant detection system service kit (Passenger Occupant Detection System Control Module -J706- and the cushion with passenger occupant detection system) must always be installed.
- Interchanging one of the components Passenger Occupant Detection System Control Module -J706- or the cushion with passenger occupant detection system with another vehicle is not permitted.
- Parts included in the service kit. Refer to Parts Information.
Special tools and workshop equipment required
- Pry Lever: 80-200