Airbag Connector, Replacing: Removing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the driver side airbag. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
CAUTION:
Pyrotechnical components can deploy unintentionally.
There is a risk of injury.
- Discharge static electricity by briefly touching the door striker.
-- Release the connector lock -2- for the connector -1- with a small flat-head screwdriver in direction of -arrow-.
-- Disconnect the connectors -1 and 3- from the Driver Airbag Igniter -N95- and Driver Airbag Release Valve Igniter -N490-.
-- Disconnect the connectors -4- by releasing the retaining tab.
-- Disengage and remove the wiring harness -2- at the brackets.