End Plate, Removing And Installing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pliers:T40172C
- Adapter:T40172/1
Removing
-- Remove the front door. Refer to DOOR, REMOVING AND INSTALLING .
-- Use the :T40172C with the :T40172/1 to remove the expanding rivets -arrows-.
-- Remove the end panel -1- to the rear.
Installing
Install in reverse order of removal.