ELECTRICAL COMPRESSOR WITH Electric Compressor Control Module -J1123-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal and note the following:

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the appropriate service information.
Used coolant cannot be used again.

CAUTION:

The electrical compressor can be damaged if the vacuum hose is loose, damaged, or blocked.

- Check the vacuum hose for the electrical compressor for damage and correct routing.

-- Install the left engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .

-- Install the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

-- Follow all steps after connecting the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .