Overview - Charge Air System, 3.0L Engine, Body Side

Fig 1: Exploded View Of Charge Air System, 3.0L Engine

Courtesy of AUDI OF AMERICA, LLC

1. Charge Air Cooler
   • Removing and Installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
   • If there are small impressions on the slats, refer to Repair Information .
2. Air Duct Hose
   • Must be free of oil and grease before installing
3. From the Turbocharger
4. To Intake Manifold
5. Seal
   • Replace if damaged
6. Charge Air Pressure Sensor -G31-
   • Removing and Installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
7. Bolt
   • 7 Nm
   • Repair solution for broken catch
   • Thread cutting
   • Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
8. O-Ring
   • Replace after removing.
9. Air Duct Pipe
   • Must be free of oil and grease before installing
10. Seal
    • Replace if damaged