Instrument Cluster Coding, Checking
Special tools and workshop equipment required
- Fault Read Out Device: VAG1551
-- Press button 1 to select "Rapid data transfer" operating mode 1.
Indicated on display
| Rapid data transfer HELP Insert address word XX |
-- Press buttons 1 and 7 to select "Instrument Cluster" address word 17.
Indicated on display
| Rapid data transfer Q 17 - Instrument Cluster |
-- Press Q button to confirm input.
Indicated on display
| Rapid data transfer Scan Tool sends address word 17 |
After 5 seconds the display indicates a part number and the control module code.
| 4D0 919 033 C4 Instrument cluster D03 → Coding 00262 WSC 06812 |
NOTE:
Refer to coding table INSTRUMENT CLUSTER, CODING - Input code number from code chart table below.
-- Advance through program sequence with → button.
Indicated on display
| Rapid data transfer HELP Select function XX |