Cylinder bank 2 (left) camshaft timing chain
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.
- Mounting Pin
- 23 Nm
- Tensioning Rail
- Camshaft Timing Chain
- Mark the running direction with paint for reinstallation
- Removing from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Removing and Installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Chain Tensioner
- Removing and Installing. Refer to CHAIN TENSIONER, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Seal
- Replace after removing
- Gliding Piece
- Replace after removing
- Control Valve
- For the camshaft adjuster
- Tightening specification and sequence. Refer to Installing .
- O-Ring
- Replace after removing
- Camshaft Adjuster
- For the intake camshaft
- Allocation. Refer to the appropriate Electronic Parts Information.
- After removal replace the friction disc (diamond disc) Cylinder bank 2 (left) camshaft timing chain
- Removing and Installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Friction Disc (Diamond Disc)
- For the connection security between the camshaft adjuster and camshaft end
- Replace after removing
- Bring the new friction disc (diamond disc) without kinking into its installation position
- Friction Disc (Diamond Disc)
- For the connection security between the camshaft adjuster and camshaft end
- Replace after removing
- Bring the new friction disc (diamond disc) without kinking into its installation position
- Camshaft Adjuster
- For the exhaust camshaft
- Allocation. Refer to the appropriate Electronic Parts Information.
- After removal replace the friction disc (diamond disc) Cylinder bank 2 (left) camshaft timing chain
- Removing and Installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- O-Ring
- Replace after removing
- Control Valve
- For the camshaft adjuster
- Tightening specification and sequence. Refer to Installing .
- Guide Rail
- Bolt
- 9 Nm
- Gear
- With the chain sprocket for the camshaft timing chain