LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Crankshaft, Cylinder Block (Servicing 8-Cylinder 4.0L 4V TFSI Engine Ea825)) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Sensor Wheel, Removing And Installing >> Removing

Sensor Wheel, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .

-- Remove the sensor wheel -arrow-.

Fig 1: Identifying Sensor Wheel
GWWA28-10118Courtesy of AUDI
CAUTION:

Do not place the sensor wheel near magnets (for example inspection lamp base, or speakers).

There is a risk of destroying the sensor wheel by magnetic force.

- Before installing the drive plate/flywheel or sensor wheel, check the function of the sensor wheel.

-- Check the sensor wheel. Refer to SENSOR WHEEL, CHECKING .