LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Cooling System (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Valves, Removing And Installing >> Transmission Fluid Cooling Valve -N509-, REMOVING AND INSTALLING, AUDI Q7/Q8 >> Removing

Transmission Fluid Cooling Valve -N509-, REMOVING AND INSTALLING, AUDI Q7/Q8: Removing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter upper section. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING, AUDI Q7/Q8 .

-- Disconnect the connector -2-.

GWWA19-12446Courtesy of AUDI

-- Loosen the hose clamps -1-, then clamp off the coolant hoses with the Hose Clamps - Up To 25mm:3094  and remove them.

-- Remove the bolts -arrows- and remove the coolant valve.