Coolant Recirculation Pump -V50-, REMOVING AND INSTALLING, AUDI A8, VERSION 2 FOR AUDI Q7/Q8: Removing
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Audi Q7/Q8:
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING, AUDI Q7/Q8 .
Audi A8:
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
Continuation for All Vehicles:
-- Disconnect the connector -4-.
-- Loosen the hose clamps, then clamp off the coolant hoses -1 and 3- with the Hose Clamps - Up To 25mm:3094 and remove them.
-- Remove the bolts -2- and the bracket with the coolant pump.
-- Remove the bolts -5- and remove the Coolant Recirculation Pump -V50- from the bracket.