LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 393 (Crankshaft, Cylinder Block (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> Ribbed Belt, Removing And Installing, Vehicle With Generator >> Removing

Ribbed Belt, Removing And Installing, Vehicle With Generator: Removing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Audi Q7/Q8:

-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .

Continuation for All Vehicles:

CAUTION:

There is a risk of injury if the radiator fan turns on by itself.

- When working near the radiator, maintain a distance from the fan.

GWWA13-11429Courtesy of AUDI
CAUTION:

Risk of destroying a used ribbed belt by reversing the running direction.

- Mark the running direction before removal.

- Pay attention to the running direction when reinstalling.

-- Turn the tensioner clockwise -arrow- to release the tension on the ribbed belt.

-- Secure the tensioner using the Locking Pin:T10060 A  (example image).

-- Remove the ribbed belt.

scientia non olet · About LEMON Manuals