Torsion Damper, Removing And Installing: Removing

Courtesy of AUDI OF AMERICA, LLC

• The Three-Phase Current Drive -VX54- is removed. Refer to Three-Phase Current Drive -VX54-, REMOVING AND INSTALLING .

-- Remove the left flange shaft. Refer to the appropriate Service Information .

-- Secure the Puller - Clutch Module:T40176  on the harmonic balancer -1- with the nut -2-.

-- Turn the Puller - Clutch Module:T40176  upward.

Courtesy of AUDI OF AMERICA, LLC

-- To prevent the torsion damper from tipping, counterhold on the bottom of the torsion damper as shown.

-- Remove the torsion damper without tilting from the input shaft -arrow-.

-- Place the torsion damper carefully on the workbench.