Centering Bracket, Removing And Installing
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
Procedure
- The transmission is removed. Refer to the appropriate Service Information .
-- Pry out the centering bracket -arrow- using the Puller - Crankshaft/Power Steering Seal:T20143/2 .
-- Clean the seat surface for the centering bracket.
-- Press in the centering bracket flush -arrow- using the Seal Installer - Selector Shaft Oil Seal:T10174 .