LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Crankshaft, Cylinder Block (Servicing 8-Cylinder 4.0L 4V TFSI Engine Ea825)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> TENSIONER For Ribbed Belt TENSIONER, Removing And Installing >> Removing

TENSIONER For Ribbed Belt TENSIONER, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model, preliminary work may be required. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

-- Remove the A/C compressor from the starter generator. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the tensioner -1-.

GWWA13-11308Courtesy of AUDI
scientia non olet · About LEMON Manuals