Crankshaft, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Unit Injector:T10055

Fig 1: Puller - Unit Injector
Courtesy of AUDI
Screwdriver:T10248 , not illustrated
Locking Pin (3 pc.):T40011

Fig 2: Identifying Locking Pin T40011
Courtesy of AUDI
Extracting Tool :T40332

Courtesy of AUDI
Locking Tool:T40362 , not illustrated

Prepare the Extracting Tool : T40332

Courtesy of AUDI

-- Tighten the pull rod -1- with the bolts -arrows- as shown on the puller cross bar Extracting Tool: T40332 .

-- Remove the threaded pins -2- for later assembly of the tool.