LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 402 (Crankshaft, Cylinder Block (8-Cylinder Direct Injection 4.0L 4V TFSI Engine Ea825)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> Starter Generator Ribbed Belt, Removing And Installing >> Installing

Starter Generator Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Position the ribbed belt. Refer to OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE .

-- To tension the ribbed belt release the tensioner.

-- Check whether the ribbed belt is routed correctly.

-- Install the A/C compressor ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Start the engine and check the ribbed belt routing.

scientia non olet · About LEMON Manuals