Fan Shroud, Removing And Installing, AUDI Q7/Q8: Removing
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
CAUTION:
There is a risk of hand injury if the radiator fan turns on by itself.
- Do not reach into the radiator fan when disconnecting the connector.
-- Release the connectors -1- and -2- for the radiator fan and remove (example image),
-- Free up the wiring harness.
-- Push the left and right left for the fan shroud -1- -arrow A-.
-- Lift the fan shroud -1- upward -arrow B- out of the mounts on the radiator -2-.
-- Push the coolant hoses to the side.
-- Remove the fan shroud downward.