Safety Precautions And Test Procedures, All-Wheel Drive Clutch 0CJ Or 0CX
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
All-Wheel Drive Clutch
- The all-wheel drive clutch has its own fluid system.
- Check the ATF level and fill (if necessary) when replacing or after repairing the all-wheel drive clutch. Refer to OIL LEVEL, CHECKING .
- Capacities (Refer to ALL-WHEEL DRIVE CLUTCH CAPACITY, 0CX AND 0DJ ) and specifications. Refer to the appropriate Electronic Parts Information.
- Clutch Torque, Checking. Refer to ALL-WHEEL DRIVE CLUTCH TORQUE, CHECKING .
ATF for All-Wheel Drive Clutch, Replacing
- If the ATF is being replaced, the >>oil age adaptation values<< under Guided Functions in the 22 - AWD electronics folder and the function 22 - Perform ATF change for all-wheel drive clutch must be reset to a new ATF. Refer to ALL-WHEEL DRIVE CLUTCH OIL, DRAINING AND FILLING .
All-Wheel Drive Clutch, Replacing
- All-Wheel Drive Clutch, Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
- If the all-wheel drive clutch is being replaced, it must be activated under Guided Functions in the 22 - AWD electronics folder with the function 22 - Replace control module . Refer to ADDITIONAL WORK WHEN REPLACING ALL-WHEEL DRIVE CLUTCH .
All-Wheel Drive Control Module -J492-, Replacing
- All-Wheel Drive Control Module, Removing and Installing. Refer to CONTROL MODULE, REMOVING AND INSTALLING .
- If the All-Wheel Drive Control Module -J492- is being replaced, additional work is required (reading out the adaptation values of the old control module). Refer to ADDITIONAL WORK FOR VEHICLES WITH "quattro ultra" .