Decoupler Actuator -V606-, REMOVING AND INSTALLING: Notes

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- If the Decoupler Actuator -V606- is supposed to be replaced, the service mode must be activated.

The Vehicle Diagnostic Tester is connected.

-- Select and start the Diagnostic operating mode.

-- Select the Test plan tab.

-- Select the Select individual test button and select the following tree structure consecutively:

Drivetrain
Engine code
0001 - OBD-capable systems
0001 - Engine electronics J623
0001 - Engine electronics functions
0001 - Activate/deactivate the service mode

Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.