Lower Timing Chain Cover, Replacing: Removing

• Engine oil drained. Refer to ENGINE OIL .

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Free up the wires.

Courtesy of AUDI

-- Remove the bolts -1, 2 and 3- and move the left coolant pipe to the side.

-- If necessary, unclip the oil dipstick tube -1- on the upper timing chain cover in direction of -arrow-.

Courtesy of AUDI

-- Remove the oil dipstick tube from the lower timing chain cover.

-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Disconnect the connector -1- for the Oil Pressure Regulation Valve -N428-.

Fig 1: Identifying Oil Pressure Regulation Valve

Courtesy of AUDI

-- Remove the bolts -1 through 15-.

Fig 2: 15 Bolts Timing Chain Cover Tightening Sequence

Courtesy of AUDI

-- Pry off the lower timing chain cover.