Outer Bracket, Removing And Installing: Removing

-- Remove the instrument panel. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .

-- Cover the Windshield Projection Head Up Display Control Module -J898- -2- with a soft towel.

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

There is a risk of destroying the windshield projection head up display control module.

- Only remove the designated bolts from the control module.

- Never remove the bolts for the housing upper section.

-- Remove the bolts -1, 3 and 4-.

-- Lift the Windshield Projection Head Up Display Control Module -J898- slightly and disconnect the connector.

-- Remove the Windshield Projection Head Up Display Control Module -J898-.

-- Remove the nuts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket -1-.