Charge Air Cooler, Removing And Installing: Removing
-- Pay attention to the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
Left Charge Air Cooler, Removing
-- Audi RSQ8: remove the left headlamp. Refer to HEADLAMP, REMOVING AND INSTALLING .
-- Release the upper and lower retainers -arrow A- and remove the air duct -1- to the left -arrow B- at the same time free up the refrigerant line.
-- Remove the front left wheel housing liner front section with wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Unclip the air duct -1- and leave in the installation position.
-- Remove the bolt -2-.
-- Loosen the hose clamp -4- and remove the air duct hose (example image).
-- Remove the bolts -arrows-.
-- Remove the left charge air cooler -1- (example image).
Right Charge Air Cooler, Removing
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the upper and lower retainers -arrow B- and remove the air duct -1- to the right -arrow A-.
-- Remove the front right wheel housing liner front section with wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Unclip the air duct -1-. (Shown on the left charge air cooler.)
-- Loosen the hose clamp -arrow- and remove the air duct hose.
-- Remove the bolts -2 and 3-.
-- Loosen the hose clamp -arrow- and remove the right charge air cooler -1-.